Santo Corporation Co., Ltd.

Inkjet Sheet

Transfer sheet to be pasted with waterWater transfer sheet

Color variations

  • White
  • Clear
  • Recommended materialmetal plastic Glass
  • Sublimation measures-
  • Water repellent / Waterproof-
  • Number of colors2
  • Gloss
Characteristics Recommendations
■It is possible to transfer to materials that heat can not be used.
■Full color printing is possible.
■Pasting on curved surfaces is also OK.
■Acceptable Inks
All kind of Solvent Inks including Latex, UV, Silk screen printing, etc
[ Use ][ Fabrics ]
metal, plastic, Glass .etc

Transfer sheet to be pasted with waterDigital Media for Textile Transfers Designed for Solvent/Eco-solvent Inks For material which can't be heated such as novelty goods

Print & Cut This material “right reading”
Soak in water for 20-30 seconds or longer for better peeling
Slide off one corner of decal & place on object.
Slide backing off decal while holding it in place.
Gently patting off water with a damp sponge.
Avoid stretching!
Let dry. For extra durability. Bake at 350℉ for 5 minutes Dishwashe Safe
A glossy, transfer material used to create water slide decals with a solvent/eco-solvent printer.

*We do our best to publish photos which are as close to the real color of the products as possible. However, the color may appear different to the actual color of the product due to monitor settings or browser conditions. We ask for your understanding.
*Specifications may change due to the manufactures circumstances.
Caution: Printable media is very sensitive. Always handle with care-with clean hands. Always store the roll in a plastic bag, protected from dust.
Test on dazzle cloth and other moisture-wicking polyesters. Moisture-wicking materials have better adhesion when washed and dried using no fabric Softener or blotted with rubbing alcohol before pressing. Be advised that dye migration has occurred with low evergy dyes in polyester and poly-blend fabrics.

Transfer Conditions

■For single press*To increase the amount of fixation,We recommend pressing twice

  • 1
    Submerge the trimmed water transfer sheet in water with the mounting paper attached. The mounting paper will separate after 20 ~ 30 seconds and it will be ready to be stuck on to the material.
  • 2
    Predetermine where the transfer sheet will be applied by shifting the mark 1 ~ 2 cm from the mounting paper and placing it on the target material.
  • 3
    Secure the sheet so that it can't move, remove excess water with a sponge or cloth and leave to naturally dry for around 1 hour.




A mix of urethane and acrylic
JIS Standard : Less than 0.05 formaldehyde content


*Remove the protective layer before cutting.
*Store in a cool place and avoid direct sunlight.
*The sheet may deteriorate if it is stored for a long period of time.
*Please always perform a transfer test before your final application.