Santo Corporation Co., Ltd.

Inkjet Sheet

If you want to suppress the bleed phenomenon Matte finishSP-J3FP

Color variations

  • White
  • Recommended materialCotton Polyester
  • Sublimation measures
  • Water repellent / Waterproof-
  • Number of colors1
  • Gloss-
Characteristics Recommendations
■Strong against washing
■Excellent stretch
■Acceptable Inks
All kind of Solvent Inks including Latex, UV, Silk screen printing, etc
[ Use ]
uniforms,
gamewear,
Sublimable dye printware
[ Fabrics ]
Cotton/Polyester

If you want to suppress the bleed phenomenon Matte finishWhite / matte or gloss

Digital Media for Textile Transfers Designed for Solvent/Eco-solvent Inks
An opaque white film that can be selected according to the effect of finishing. Block agent to reduce is included Has a new thicker liner to reduce curl.
Acceptable Fabrics
Cotton, Uncoated Polyester, Blended Fabrics, Wool, Linen Excluding Nylon

*We do our best to publish photos which are as close to the real color of the products as possible. However, the color may appear different to the actual color of the product due to monitor settings or browser conditions. We ask for your understanding.
*Specifications may change due to the manufactures circumstances.
Caution: Printable media is very sensitive. Always handle with care-with clean hands. Always store the roll in a plastic bag, protected from dust.
Test on dazzle cloth and other moisture-wicking polyesters. Moisture-wicking materials have better adhesion when washed and dried using no fabric Softener or blotted with rubbing alcohol before pressing. Be advised that dye migration has occurred with low evergy dyes in polyester and poly-blend fabrics.

Transfer Conditions

■For a double press method

  • 1
    Place the material on the heat press machine with the sheet that has been transferred onto the application film in place. Do the first transfer press (initial press).
  • 2
    Remove the application film which the material is still warm.
  • 3
    Place the texturing paper and recay paper on to the sheet and then do a second heat press (final press).

1st transfer

  • Transfer temperature135℃~140℃
  • Transfer time3~5sec
  • Transfer pressure350~450g/㎠

2nd transfer

  • Transfer temperature135℃~140℃
  • Transfer time10sec~
  • Transfer pressure350~450g/㎠

Standard

・Roll:630mm×20M

Material

・urethane(100%)
JIS Standard L103 testing method Tested 5 times, awarded level 5
Dry cleaning (petroleum based product) Level 5 Washing durability Level 5
Test results Chlorine test Level 5, Less than 0.01 formaldehyde content(Able to be used for clothing for infants under 24 months old)

[Caution]

*The temperature and pressure of the heat press may need to be adjusted depending on the condition of the material you are transferring onto. When reheating or applying a final press, a protection sheet or something similar must be used.
*We recommend pressing the material without the transfer sheet once to prepare the material for a better end result.
*Please remove the application fim after heat pressing while it is still warm.
*When reheating the sheet for the final application, you must use a protective sheet to avoid direct contact.
*When ironing after washing, don't iron the sheet area directly. Cover the sheet area with some fabric and iron indirectly.
*Please always perform a transfer test before your final application.
*We recommend using texturing paper to focus the pressure when printing onto thick material.