Santo Corporation Co., Ltd.

SP-JSSP (英語)
SP-JSSP (英語)
SP-JSSP (英語)
SP-JSSP (英語)
SP-JSSP (英語)
SP-JSSP (英語)
SP-JSSP (英語)
SP-JSSP (英語)
SP-JSSP (英語)
SP-JSSP (英語)
SP-JSSP (英語)
SP-JSSP (英語)
SP-JSSP (英語)
SP-JSSP (英語)
SP-JSSP (英語)
SP-JSSP (英語)
SP-JSSP (英語)
SP-JSSP (英語)
SP-JSSP (英語)
SP-JSSP (英語)
SP-JSSP (英語)
SP-JSSP (英語)
SP-JSSP (英語)
SP-JSSP (英語)
SP-JSSP (英語)
SP-JSSP (英語)
Find transfer conditions here
Inkjet Sheet

Flexible Stretch Transfer SheetSP-JSSP

Color variations

  • White
  • Recommended materialCotton Polyester
  • Sublimation measures-
  • Water repellent / Waterproof-
  • Number of colors1
  • Gloss-
Characteristics Recommendations
・Sublimation measures applied　
[ Use ]
Swimwear, Inner-garments
[ Fabrics ]
Cotton/Polyester

Flexible Stretch Transfer SheetFlexible Stretch Transfer Sheet

A stretch sheet that has a superior ability to expand and contract, allowing it to recover quickly.
This transfer sheet is perfect for swimwear and inner-garments which are elastic and flexible.

※We do our best to publish photos that are as close to the real color of the products as possible. However, the color may appear
different to the actual color of the product due to monitor settings or browser conditions. We ask for your understanding.
※Specifications may change due to the manufactures circumstances.
Caution: Printable media is very sensitive. Always handle with care-with clean hands. Always store the roll in a plastic bag, protected from dust. Test on dazzle cloth and other moisture-wicking polyesters. Moisture-wicking materials have better adhesion when washed and dried using no fabric Softener or blotted with rubbing alcohol before pressing. Be advised that dye migration has occurred with low energy dyes in polyester and poly-blend fabrics.

Transfer Conditions

■For a double press method

  • 1
    Place the material on the heat press machine. Place the sheet which has had the pattern transferred onto its application film on top of the material and adjust the location of the transfer. Do the first transfer press (pre-press).
  • 2
    Remove the application film while the material is still warm.
  • 3
    Place the texturing paper and recay paper onto the sheet and then do a second heat press (final press).

1st transfer

  • Transfer temperature135℃～140℃
  • Transfer time3～5sec
  • Transfer pressure350～450g/㎠

2nd transfer

  • Transfer temperature135℃～140℃
  • Transfer time10sec~
  • Transfer pressure350～450g/㎠

Standard

roll：500mm×10M

Material

Urethane(100%)
JIS Standard L103 testing method Tested 5 times, awarded level 5
Dry cleaning (petroleum based product) Level 5
Washing durability Level 5
Test results
Chlorine test Level 5, Less than 0.01 formaldehyde content
(Able to be used for clothing for infants under 24 months old)

[Caution]

※When reapplying pressure, you can increase the strength of the adhesive by putting the marking sheet on the bottom side of the heat press and transferring from the reverse side. ※The temperature and pressure needs to be adjusted depending on the material you are transferring onto.