Luminescent (Glow-In-The Dark) FilmSP-OWLs
Color variations
Yellow Green
Blue
- Recommended materialCotton Polyester
- Sublimation measures-
- Water repellent / Waterproof-
- Number of colors2
- Gloss〇
■Also phosphoresce by body temperature
■Acceptable Inks = All kind of Solvent Inks including Latex, UV, Silk screen printing, etc
T-shirts,
uniforms,
sportswear
Signs,
original goods.
etc
[ Fabrics ]
Cotton/Polyester
Luminescent (Glow-In-The Dark) FilmWashing repeatedly OK!
Our Brightness and Phosphorescence time are remarkable compare to similar film/materials available in the market today
Printable in full color
Heat transferable on most of all Fabrics
Also available a sticker type for Heat Sensitive materials/application
Create a unique appearance for both show wear and promotional garments
*We do our best to publish photos which are as close to the real color of the products as possible. However, the color may appear different to the actual color of the product due to monitor settings or browser conditions. We ask for your understanding.
*Specifications may change due to the manufactures circumstances.
Caution: Printable media is very sensitive. Always handle with care-with clean hands. Always store the roll in a plastic bag, protected from dust.
Test on dazzle cloth and other moisture-wicking polyesters. Moisture-wicking materials have better adhesion when washed and dried using no fabric Softener or blotted with rubbing alcohol before pressing. Be advised that dye migration has occurred with low evergy dyes in polyester and poly-blend fabrics.
Transfer Conditions
■For a double press method
1
Place the material on the heat press machine with the sheet that has been transferred onto the application film in place. Do the first transfer press (initial press).
2
Remove the application film which the material is still warm.
3
Place the texturing paper and recay paper on to the sheet and then do a second heat press (final press).
1st transfer
- Transfer temperature135℃～140℃
- Transfer time5～7sec
- Transfer pressure350～400g/㎠
2nd transfer
- Transfer temperature135℃～140℃
- Transfer time15sec～
- Transfer pressure350～400g/㎠
Standard
・Roll (Thermal transfer)(Sticke)：630mm×1M～10MMaterial
・urethan and Strontium aluminateThe brightness of phosphorescent products are determined by JIS Z9107 (Safety and performance classification, testing method and performance standard). Within this standards there are 4 different levels of brightness represented by the letters JA ~ JD.
・JA：30min（15mcd/㎡）60min（7mcd/㎡）
・JB：30min（31mcd/㎡）60min（15mcd/㎡）
・JC：30min（62mcd/㎡）60min（30mcd/㎡）
・JD（Ⅰgroup）：30min（124mcd/㎡）60min（60mcd/㎡）
We take orders for JD class I group OEM products. Please inquire.
[Caution]
*The temperature and pressure of the heat press may need to be adjusted depending on the condition of the material you are transferring onto. When reheating or applying a final press, a protection sheet or something similar must be used.*The MX application sheet is required.
*We recommend pressing the material without the transfer sheet once to prepare the material for a better end result.
*Please remove the application fim after heat pressing while it is still warm.
*When reheating the sheet for the final application, you must use a protective sheet to avoid direct contact.
*When ironing after washing, don't iron the sheet area directly. Cover the sheet area with some fabric and iron indirectly.
*Please always perform a transfer test before your final application.
*We recommend using texturing paper to focus the pressure when printing onto thick material.